Edge to Edge Quilting on Your Embroidery Machine

Edge to Edge on your Embroidery Machine with Sharon
"Quilting like a longarm, done in a day!"
Put your machine to work and save some $$ by quilting your next quilt, Edge to Edge designs ,with your embroidery machine!

Techniques Taught:

- Edge to Edge Quilting in Embroidery Hoop
- Measuring and Planning
- Hooping Tips/Tricks

10:30am - 3:30pm. Doors open at 10am.

Waitlists available for each class & we will contact you if seats come available through cancellations. Bring lunch/snacks!

BERNINA 8 Series Machines - Jumbo Hoop
BERNINA 7 Series Machine - Maxi Hoop
BERNINA 5 Series Machines - Midi Hoop

Other Brands - Your largest hoop minimum 6” x 10”
All Machines welcome to bring the magnetic Snap Hoops by DIME. Available @ Bobbin & Bolt. Purchase largest for your machine. 

Prep/Required Materials:

• Arrive to class with your quilt sandwich already together. Basted in your favorite method, whether spray, sewn, or pin basted. 
• We recommend using Request Loft (thinnest) batting by Quilter’s Dream for your first one. 
• Backing and Batting must be 5” - 6” larger than your quilt top on all sides. This is to allow us to quilt the blocks on the edge, so we are still able to hoop them. 
• We recommend a wall hanging to lap size quilt for your first one. No table runners or placemats, please. 
• Download the 10 embroidery designs from the CD rom in the book and load them on a USB stick. Decide which out of the 10 designs in the book you want to use. 

Supplies:

• Legal Copy of Edge to Edge Quilting in the Hoop Book by Amelie Scott
• 2nd Edition is out now. If you need to purchase - please purchase 2nd edition. If you own the first edition that is fine to bring to class, you do not need to buy the book again.
• Request batting for your quilt top, 5”-6” larger on all sides
• Completed Quilt top
• Backing Fabric 5” -6” larger on all sides
• USB stick with your designs already loaded
• OESD Polymesh Cutaway Embroidery Stabilizer - Make sure the roll is the same width as your hoop. 
• 505 basting spray
• Chose your thread. We recommend Isacord 40wt Polyester or 50wt Aurifil Cotton
• 40wt Isacord Embroidery thread - use 75/11 Embroidery Needle
• 50wt Cotton Aurifil Thread - use 80/12 or 90/14 Embroidery Needle
• Match your bobbin to your top thread. Use same weight. Color can be different, but we recommend matching top & bobbin for you first quilt. 
• Pen/Paper for notes
• Basic Embroidery supplies such as snips, seam ripper, scissors, tweezers, extra needles etc. 
• Basic 4" - 6" x 24" Quilt Ruler and/or Soft Tape Measure
• Machine in good working order with Embroidery Module
• Embroidery foot (BERNINA machines use #26)
• Straight Stitchplate (optional but helpful!)